aboutsummaryrefslogtreecommitdiff
path: root/scripts/vpu-clocks.initd
diff options
context:
space:
mode:
authorNick Moore <nicholasvmoore@gmail.com>2026-11-17 08:13:59 -0600
committerNick Moore <nicholasvmoore@gmail.com>2026-11-17 08:14:12 -0600
commit8a4e71cb0f3dda9c3c9f981f825302ce69616719 (patch)
treee1dd11ef23cea3cbd1d50a933c1dd11054407580 /scripts/vpu-clocks.initd
RK3328 VPU clock fix: DTS patch, CRU tool, boot-pin units, watchdog, write-ups
Out-of-box RK3328 BSP kernels boot the video decoder clocks at 100 MHz and the mpp driver's auto-frequency path never fires, capping 4K HEVC decode at 33.8 fps (57% of datasheet spec). Consumer-node clock assignment at 400 MHz restores the driver's own declared advanced rate: 70.2 fps decode, 40.8 fps dec->RGA. Includes a no-rebuild boot-pin alternative (OpenRC + systemd) and a repin watchdog.
Diffstat (limited to 'scripts/vpu-clocks.initd')
-rw-r--r--scripts/vpu-clocks.initd46
1 files changed, 46 insertions, 0 deletions
diff --git a/scripts/vpu-clocks.initd b/scripts/vpu-clocks.initd
new file mode 100644
index 0000000..e53d7fa
--- /dev/null
+++ b/scripts/vpu-clocks.initd
@@ -0,0 +1,46 @@
+#!/sbin/openrc-run
+# /etc/init.d/vpu-clocks — boot-time pin for RK3328 VPU decoder/RGA clocks.
+#
+# Why: the BSP mpp auto-frequency path never fires for rkvdec on RK3328
+# (/proc/mpp_service/rkvdec/* real_rate_hz stays 0), so the clocks stay at
+# the rk3328.dtsi boot pins: 100 MHz decoder / 50 MHz venc — 33.8 fps 4K
+# HEVC decode instead of 70.2 fps at 400 MHz. Use this when you cannot
+# rebuild the kernel/DTS (the DTS fix in patches/0001-*.patch is the
+# preferred, reboot-free-at-boot fix).
+#
+# Requires: gcc-compiled scripts/cru.c installed as /usr/local/bin/cru.
+#
+# CRU register math: CLKSEL_CON(n) = 0xFF440000 + 0x100 + 4n. Hiword
+# [31:16] of the written word is the per-bit write-enable mask (required,
+# or the write is ignored). Each field: bits[4:0] divider (rate =
+# parent/(div+1)), bits[7:6] mux (0 = CPLL @ 1200 MHz live). 0x0202 per
+# halfword = div 2 + mux CPLL = 400 MHz.
+#
+# CON(51) (venc) is deliberately NOT pinned: the venc driver self-manages
+# (resume -> 300 MHz, idle -> 50 MHz reduce) via working CCF writes, and
+# 400 MHz showed no encode gain (27.15 vs 27.32 fps — noise).
+
+description="Pin RK3328 VPU decode/RGA clocks to 400 MHz (rkmpp BSP workaround)"
+
+depend() {
+ after local
+}
+
+start() {
+ ebegin "Pinning RK3328 VPU/decoder/RGA clocks to 400 MHz"
+ # CON(48) 0x1C0: aclk_rkvdec_pre (div[4:0], mux[7:6]) +
+ # sclk_vdec_cabac (div[12:8], mux[15:14])
+ /usr/local/bin/cru 0x1c0 0xFFFF0202
+ # CON(49) 0x1C4: sclk_vdec_core (div[4:0], mux[7:6])
+ /usr/local/bin/cru 0x1c4 0x00FF0202
+ # CON(36) 0x190: clk_rga (div[4:0], mux[7:6]) +
+ # aclk_rga_pre (div[12:8], mux[15:14]) — mux must be
+ # forced to CPLL or clk_rga stays on its GPLL default
+ # (491.52/3 = 163.84 MHz; RGA is clock-bound)
+ /usr/local/bin/cru 0x190 0xFFFF0202
+ # mpp_service load-accounting interval: /proc/mpp_service/load reads
+ # garbage at the default interval; 1000 gives sane load/util numbers
+ # for /proc/mpp_service/load and the telemetry sampler
+ echo 1000 > /proc/mpp_service/load_interval
+ eend $?
+}