aboutsummaryrefslogtreecommitdiff
path: root/scripts/vpu-clock-watchdog.sh
diff options
context:
space:
mode:
authorNick Moore <nicholasvmoore@gmail.com>2026-11-17 08:13:59 -0600
committerNick Moore <nicholasvmoore@gmail.com>2026-11-17 08:14:12 -0600
commit8a4e71cb0f3dda9c3c9f981f825302ce69616719 (patch)
treee1dd11ef23cea3cbd1d50a933c1dd11054407580 /scripts/vpu-clock-watchdog.sh
RK3328 VPU clock fix: DTS patch, CRU tool, boot-pin units, watchdog, write-ups
Out-of-box RK3328 BSP kernels boot the video decoder clocks at 100 MHz and the mpp driver's auto-frequency path never fires, capping 4K HEVC decode at 33.8 fps (57% of datasheet spec). Consumer-node clock assignment at 400 MHz restores the driver's own declared advanced rate: 70.2 fps decode, 40.8 fps dec->RGA. Includes a no-rebuild boot-pin alternative (OpenRC + systemd) and a repin watchdog.
Diffstat (limited to 'scripts/vpu-clock-watchdog.sh')
-rw-r--r--scripts/vpu-clock-watchdog.sh34
1 files changed, 34 insertions, 0 deletions
diff --git a/scripts/vpu-clock-watchdog.sh b/scripts/vpu-clock-watchdog.sh
new file mode 100644
index 0000000..93d1d0b
--- /dev/null
+++ b/scripts/vpu-clock-watchdog.sh
@@ -0,0 +1,34 @@
+#!/bin/sh
+# vpu-clock-watchdog.sh — repin RK3328 decoder/RGA CRU dividers to 400 MHz
+# whenever something moves them. Belt-and-braces for the DTS/initd pins:
+# the BSP mpp driver never touches rkvdec clocks on RK3328 today, but the
+# venc driver re-applies its own defaults at every session start, and a
+# future driver change could do the same to the decoder — this keeps the
+# proven 400 MHz config live without a reboot. Same logic as the pin=1
+# mode of vpu-telemetry.sh, minus telemetry.
+#
+# Needs root (cru writes /dev/mem). Run via rc: see vpu-clock-watchdog
+# initd below, or manually: doas -n /usr/local/bin/vpu-clock-watchdog.sh
+#
+# usage: vpu-clock-watchdog.sh [interval-seconds] (default 5)
+
+CRU=${CRU:-/usr/local/bin/cru}
+INTERVAL=${1:-5}
+
+# reg lowhalf-target full-write-with-mask
+# CON(48) 0x1C0: aclk_rkvdec_pre + sclk_vdec_cabac -> 0x0202 each
+# CON(49) 0x1C4: sclk_vdec_core -> 0x0002 (low field only)
+# CON(36) 0x190: clk_rga + aclk_rga_pre -> 0x0202 each
+PIN_48=0xFFFF0202
+PIN_49=0x00FF0202
+PIN_36=0xFFFF0202
+
+while :; do
+ c48=$($CRU 0x1c0 2>/dev/null)
+ [ $((c48 & 0xffff)) != $((0x0202)) ] && $CRU 0x1c0 $PIN_48 >/dev/null
+ c49=$($CRU 0x1c4 2>/dev/null)
+ [ $((c49 & 0xff)) != $((0x02)) ] && $CRU 0x1c4 $PIN_49 >/dev/null
+ c36=$($CRU 0x190 2>/dev/null)
+ [ $((c36 & 0xffff)) != $((0x0202)) ] && $CRU 0x190 $PIN_36 >/dev/null
+ sleep "$INTERVAL"
+done