From 06532e55c4984fa40919d492afe996f6bfc77a51 Mon Sep 17 00:00:00 2001 From: Nick Moore Date: Tue, 17 Nov 2026 08:19:07 -0600 Subject: [PATCH] arm64: dts: rockchip: pin RK3328 rkvdec/RGA clocks at the mpp advanced rate The rk3328.dtsi CRU assigned-clock-rates boot the video decoder interfaces at 100 MHz (ACLK_RKVDEC_PRE, SCLK_VDEC_CABAC, SCLK_VDEC_CORE) and the RGA at 100 MHz. On the Rockchip 6.12 BSP (rkr) mpp stack the rkvdec auto-frequency path never fires on RK3328: /proc/mpp_service/rkvdec/{aclk,clk_core,clk_cabac,clk_hevc_cabac} report real_rate_hz of 0, idle and under full load, so the driver's rockchip,normal-rates (300 MHz) and rockchip,advanced-rates (400 MHz) are never applied and decode runs at the 100 MHz boot pin - 33.8 fps 4K HEVC vs 70.2 fps with the clocks at 400 MHz (117% of the 60 fps datasheet spec, RK3328 datasheet v1.4). Fix by assigning the clocks on the consumer nodes at the advanced rate. Consumer-node assignments execute at device probe, after the CRU has raised CPLL to 1.2 GHz, so the rate resolves exactly (1200/3) and CCF selects the CPLL parent. The venc (H.264 encoder) side is left alone: the venc driver self-manages its clocks (runtime-resume -> 300 MHz default, idle -> 50 MHz reduce rate) via working CCF writes. Measured on Rock Pi E (RK3328, kernel 6.12.81-rkr12, 2160p50 HEVC 11.6 Mbps test stream): clocks decode 4K HEVC dec->RGA->null boot pins (100/50 MHz) 33.79 fps 31.55 fps decoder + RGA @ 400 MHz 70.21 fps 40.84 fps RGA note: the clk_rga mux can rest on GPLL (reset default), leaving it at 491.52/3 = 163.84 MHz even after a divider change. Assigning SCLK_RGA at boot forces the CPLL parent; measured dec->RGA->null went 31.4 -> 40.8 fps. Signed-off-by: Nick Moore --- arch/arm64/boot/dts/rockchip/rk3328.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index ccbbd5f..4ff019e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -1066,6 +1066,10 @@ operating-points-v2 = <&rkvdec_opp_table>; #cooling-cells = <2>; devfreq = <&dmc>; + assigned-clocks = <&cru ACLK_RKVDEC_PRE>, <&cru SCLK_VDEC_CORE>, + <&cru SCLK_VDEC_CABAC>; + assigned-clock-rates = <400000000>, <400000000>, + <400000000>; status = "disabled"; vcodec_power_model: vcodec_power_model { @@ -1215,6 +1219,8 @@ interrupts = ; clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA>; clock-names = "aclk_rga", "hclk_rga", "clk_rga"; + assigned-clocks = <&cru ACLK_RGA_PRE>, <&cru SCLK_RGA>; + assigned-clock-rates = <400000000>, <400000000>; status = "disabled"; }; -- 2.56.1