aboutsummaryrefslogtreecommitdiff
#!/sbin/openrc-run
# /etc/init.d/vpu-clocks — boot-time pin for RK3328 VPU decoder/RGA clocks.
#
# Why: the BSP mpp auto-frequency path never fires for rkvdec on RK3328
# (/proc/mpp_service/rkvdec/* real_rate_hz stays 0), so the clocks stay at
# the rk3328.dtsi boot pins: 100 MHz decoder / 50 MHz venc — 33.8 fps 4K
# HEVC decode instead of 70.2 fps at 400 MHz. Use this when you cannot
# rebuild the kernel/DTS (the DTS fix in patches/0001-*.patch is the
# preferred, reboot-free-at-boot fix).
#
# Requires: gcc-compiled scripts/cru.c installed as /usr/local/bin/cru.
#
# CRU register math: CLKSEL_CON(n) = 0xFF440000 + 0x100 + 4n. Hiword
# [31:16] of the written word is the per-bit write-enable mask (required,
# or the write is ignored). Each field: bits[4:0] divider (rate =
# parent/(div+1)), bits[7:6] mux (0 = CPLL @ 1200 MHz live). 0x0202 per
# halfword = div 2 + mux CPLL = 400 MHz.
#
# CON(51) (venc) is deliberately NOT pinned: the venc driver self-manages
# (resume -> 300 MHz, idle -> 50 MHz reduce) via working CCF writes, and
# 400 MHz showed no encode gain (27.15 vs 27.32 fps — noise).

description="Pin RK3328 VPU decode/RGA clocks to 400 MHz (rkmpp BSP workaround)"

depend() {
	after local
}

start() {
	ebegin "Pinning RK3328 VPU/decoder/RGA clocks to 400 MHz"
	# CON(48) 0x1C0: aclk_rkvdec_pre (div[4:0], mux[7:6]) +
	#                sclk_vdec_cabac (div[12:8], mux[15:14])
	/usr/local/bin/cru 0x1c0 0xFFFF0202
	# CON(49) 0x1C4: sclk_vdec_core (div[4:0], mux[7:6])
	/usr/local/bin/cru 0x1c4 0x00FF0202
	# CON(36) 0x190: clk_rga (div[4:0], mux[7:6]) +
	#                aclk_rga_pre (div[12:8], mux[15:14]) — mux must be
	#                forced to CPLL or clk_rga stays on its GPLL default
	#                (491.52/3 = 163.84 MHz; RGA is clock-bound)
	/usr/local/bin/cru 0x190 0xFFFF0202
	# mpp_service load-accounting interval: /proc/mpp_service/load reads
	# garbage at the default interval; 1000 gives sane load/util numbers
	# for /proc/mpp_service/load and the telemetry sampler
	echo 1000 > /proc/mpp_service/load_interval
	eend $?
}